Monitor, Verify and Trust.

Windsor Office
logo
Call Us
  • 1-970-686-2189

  • info@dpdiagnostics.com

Location Pin
  • Windsor, Colorado

  • United States

Working Hours
  • 08:00AM - 05:00PM

  • Monday to Friday

  • +1(123) 456 567

  • support@copious.com

  • Manhattan Hall,

  • Copious Melbourne, New Yourk

  • 08:00 - 16:30

  • Monday to Saturday

  • +1(123) 456 567

  • support@copious.com

  • Manhattan Hall,

  • Copious Melbourne, New Yourk

  • 08:00 - 16:30

  • Monday to Saturday

Differential Pressure Prognosis Case Study

If it Isn’t Broke Don’t Fix It!

This is a more economical maintenance practice, makes technicians more efficient, and is safer. Don’t break containment if it’s not absolutely necessary.

Read More

Case Study | Orifice | Differential Meter Prognosis
Reduced Routine Scheduled Maintenance

The results assure the end user that the orifice meter is fully serviceable and does not require maintenance.

Read More

Case Study | Orifice | Differential Meter Prognosis
UK Central Acquisition Terminal Service

A primary use of flow meter verification systems (powered by diagnostic systems) is to assure the flow meter is operating correctly.

Read More

Case Study | Orifice | Differential Meter Prognosis
Orifice Meter Prognosis

Due to a mass balance issue, a natural gas station operator suspected a 12" 0.496 beta orifice meter was giving erroneous readings.

Read More

Case Study | Orifice | Differential Meter Prognosis
GDF SaltEnd Power Station

Orifice Meter with Erroneous DP Reading, Power Station, 12” Orifice Meter.

Read More

Case Study | Orifice | Differential Meter Prognosis
Contamination(Orifice)

Prognosis was installed on a 6”, 0.60 beta natural gas station Orifice Meter, The diagnostic response indicated a metering problem.

Read More

Case Study | Orifice | Differential Meter Prognosis
ConocoPhilips / Rosneft “Polar Lights” Field

Due to a mass balance issue, a natural gas station operator suspected a 12" 0.496 beta orifice meter was giving erroneous readings.

Read More

Case Study | Orifice | Differential Meter Prognosis
Geometry Error and Contamination

Prognosis was installed on a 4”, sch 40,0.4 beta orifice plate union meter in a natural gas station.

Read More

Case Study | Orifice | Differential Meter Prognosis
Wet Gas Venturi

A 10” 0.4 beta Venturi meter was calibrated to be Prognosis ready (see Figure), This meter was installed offshore

Read More

Case Study | Orifice | Differential Meter Prognosis
Geometry Error(Venturi)

Prior to meter installation on a North Sea offshore platform, during calibration Prognosis detected an error in the 8" 0.4 beta keypad entered meter geometry.

Read More

Case Study | Venturi | Differential Meter Prognosis
Geothermal Saturated Steam Metering

The DP Diagnostics Prognosis Valysys and Phase Track systems were applied to Lansvirkjun geothermal saturated steam production flow orifice meters. Phase Track was specifically set to saturated steam conditions.

Read More

Case Study | Venturi | Differential Meter Prognosis